Setting Modem Smart Fren di Ubuntu 11.04

Mulanya seorang teman bernama Fahru Rio Angganda main ke rumah saya untuk meminta tarikan kabel UTP dari warnet saya untuk meminta jaringan internet di sambungkan ke notebooknya. Dia ingin  mencoba mensetting Modem Smart di operating system Linux. Tidak lama kemudian dia mencoba mencari-cari di embah google ternyata ketemu juga yang dia cari. Dan hasilnya adalah seperti pada langkah-langkah di bawah ini.:


1 Masuk kedalam terminal ubuntu kemudian lakukan pengecekan USB :
root@ubuntu:#lsusb

2. kemudian akan ada banyak baris dan salah satunya seperti ini :
Bus 002 Device 003: ID 19d2:ffde ONDA Communication S.p.A.


3. Kemudian eject usb :
root@ubuntu:#eject /dev/sr0

4. dan lakukan kembali lsusb maka akan ada perubahan
Bus 002 Device 003: ID 19d2:ffdd ONDA Communication S.p.A.

5. kemudian masukan parameter kernel
root@ubuntu:#modprobe usbserial vendor=0x19d2 product=0xffdd

6. Setelah Konfigurasi awal diatas telah selesai kita butuk paket tambahan untuk konfigurasi..

7. Kita install paket wvdial
root@ubuntu:#apt-get install wvdial

8. kemudian ketik wvdianconf untuk membuat file configurasi wvdial
root@ubuntu:#wvdialconf

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

9. Kemudian edit file wvdial di dir. /etc
root@ubuntu:#nano /etc/wvdial.conf

[Dialer smart]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Username = smart
Init1 = ATZ
Password = smart
Modem = /dev/ttyUSB0
Baud = 460800
Command Line = ATDT
Stupid Mode = 1

10. Kemudian jalanka dial untuk Modem :
root@ubuntu:#wvdial smart
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 3100000
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Jul 18 14:13:46 2011
--> Pid of pppd: 1792
--> Using interface ppp0
--> pppd: ح� 8��
--> pppd: ح� 8��
--> pppd: ح� 8��
--> pppd: ح� 8��
--> local IP address 10.187.111.130
--> pppd: ح� 8��
--> remote IP address 10.17.95.12
--> pppd: ح� 8��
--> primary DNS address 10.17.3.244
--> pppd: ح� 8��
--> secondary DNS address 10.17.3.252
--> pppd: ح� 8��


sumber teman : http://uutheexplorer.blogspot.com/2011/11/setting-modem-smart-fren-di-ubuntu-1104.html